Concrete driveway building in Boynton Beach FL - a slab that drains away from your garage
If your driveway is cracked, sinking or holding water by the garage, we can build a new one on packed ground that drains properly.
- Licensed and insured.
- Free in-person estimates.
- Replies within 1 business day.
What goes into building a concrete driveway in Boynton Beach?
Concrete driveway building in Boynton Beach means clearing out the soft dirt and roots, packing a firm base, setting the slope so rain runs away from your garage, and then pouring and finishing a slab that suits what you park on it.
If your old driveway is cracked, sinking or holding water by the garage door, you may be weighing whether to patch it or start over, and I'm glad to help you think that through. The price mostly depends on the size of the driveway, whether an old slab has to come out, how much fill the ground needs, how thick the slab has to be for your vehicles and the finish you choose. The schedule depends on the permit review and the weather on pour day. We're based in Boynton Beach and work in many cities around it in Palm Beach and Broward counties, and the estimate I write lists what's included, so you can compare it fairly with any other.
How do you know it's time for a new driveway?
Cracks that keep widening
A hairline crack is normal for concrete, but cracks that open wider each year or break the slab into loose pieces usually mean the ground underneath has moved. Waiting lets water get in and wash out more of that ground, so the damage tends to spread to the next section.
Sinking or uneven sections
When one section drops lower than the one beside it, the dirt under it was usually never dug out and packed, and it has settled. Those raised edges catch tires and feet, and they tend to get worse rather than settle back.
Water pooling by the garage
Puddles that sit at the garage door or along the edges mean the slope is wrong or the slab has sunk. Standing water softens the ground under the slab and can find its way into the garage, so it's worth fixing before the next stretch of heavy rain.
How we build a concrete driveway
A driveway is only as good as the ground and slope beneath it, so we put real time into prep before any concrete arrives. We dig out roots, organic soil and anything soft. We pack the fill and any utility trenches, and we grade the subgrade, the ground the slab sits on, so water runs away from your garage and off the edges. Then we set the forms, add rebar where the design calls for it, which is steel that holds the slab together if it cracks, and pour. We give the top a broom finish, a light texture that keeps tires and shoes from slipping when it's wet. We also cut control joints, straight grooves that give the concrete a planned place to crack as it shrinks. I'll tell you plainly that most slabs get a few small cracks, and the joints keep them neat and out of the way. Last comes curing, keeping the concrete damp and protected while it hardens, because a slab that dries too fast ends up weaker on top. I'll also ask what you plan to park on it, since a work truck or a boat trailer needs a sturdier design than a sedan. If the budget has to come down, please let us trim the finish rather than the base, because nobody sees the base on day one, but it decides whether the driveway stays flat for years.
A driveway is flatwork, the trade's word for slabs you walk and drive on, so the rest of your flatwork is easy to plan at the same time. Our concrete patio construction follows the same prep and grading. If you'd like a pattern or color in place of plain gray, our stamped concrete services can be used on the whole driveway or on a border.
Broom-finished concrete
This suits most homeowners who want a durable, practical driveway at the lower end of the cost. The broom texture grips well in the rain and is simple to repair or match later.
Stamped or colored concrete
This suits homeowners who want the driveway to match the house or a patio. The pattern and sealer add cost, and the surface needs resealing from time to time to keep its look.
Get a written estimate for your new driveway
We reply within one business day to set a time. I come out myself to look at the site and write a free estimate that lists what's included, and there is no obligation.
- Based in
- Boynton Beach, FL 33426
- Hours
- Mon–Sun: 7 AM–11 PM
What happens after you call us about a driveway?
Here's how a driveway job runs with us, from your first call to the final walk-through, so you know who you'll talk to and what you'll have in hand.
Call or send the form
Call (561) 336-6418 or send the form with your address and a line about the driveway you have in mind. We'll get back to you to set a time that suits you.
I visit and look over the site
I check the slope, the old slab and the street side, and I ask what the driveway needs to carry. You get a written estimate that lists what's included, so you can see where each part of the price goes.
We handle the permit paperwork
If you decide to go ahead, we take care of the paperwork and tell you early which papers to have ready. The city asks owners to allow up to 15 calendar days for staff review, so we plan your start date around that wait.
Prep, pour and walk-through
We do the prep, then pour and finish the slab. When we're done, I walk the driveway with you before we pack up and explain how to look after it while it cures.
Why Boynton Beach homeowners call Quality Boynton Beach Concrete Company for driveways
I write the estimate myself
I come out myself to look at the job and write the estimate, and I'm on site with our crew while the work gets done. The person who planned your slope is the same person watching it get set.
In business since 2021
I spent years at a desk before I learned concrete on a crew in Palm Beach County, and I started this company in 2021. I remember sitting on the customer's side of the desk, so I'd rather explain what to expect, small cracks included, than leave you surprised later.
Licensed and insured for curb work
Where an existing curb runs in front of your house, the city requires the driveway to meet it as a drop curb, a lowered section of curb, and a licensed contractor has to build it. We're licensed and insured, so the same crew can build the curb and the driveway.
On a driveway, the part that matters most is the ground you'll never see. Please contact us so I can look at yours before you decide anything.
Driveway permits, curbs and drainage in Boynton Beach
The City of Boynton Beach handles residential permits. If your new driveway adds 800 square feet or more of impervious surface, the hard area rain can't soak through, the submittal needs an engineer's drainage calculations and plan, because that much concrete changes where rainwater goes. When a job needs a permit, we pull it, handle the city submittal and inspections, and let you know early what papers to have ready. There are a few local points to check besides the drop curb mentioned above. A house on a county road needs a Palm Beach County permit for the work, and you'll give the city proof of it. A home in an HOA needs the HOA's written approval as part of the submittal. You can review the requirements on the city's permitting resources page.
Most driveways we build here sit on flat lots, so a small amount of slope in the wrong direction is the difference between rain running to the street and a puddle at the garage door. We check the grade before the forms go in. We see the same flat ground, street curbs and HOA neighborhoods on jobs in Delray Beach and Lantana, and we handle them the same way.
Questions about concrete driveways in Boynton Beach
How much does a concrete driveway cost in Florida?
In Florida, a 4-inch concrete slab with labor and materials usually costs about $8 to $14 per square foot installed. Where your driveway falls in that range depends on removing the old slab, how much fill and grading the ground needs, a thicker design for heavy vehicles, a stamped finish and any curb work. I'll measure your site and write an estimate that lists each of those, so you can see your own figure.
How do I apply for a driveway permit in Boynton Beach?
Boynton Beach takes residential permits through Sages Gov, its permit system, and for a driveway the city doesn't require professionally prepared plans. Instead, the proposed work is shown on a certified survey of your property, so please have yours handy. When we do the job, we file the application for you.
When can I drive on a new concrete driveway?
You can drive on it once it has cured enough to carry your car, which is later than the day it looks hard, because concrete keeps gaining strength after you can walk on it. Its color and how hard the surface feels don't tell you it's ready for weight. Driveway guidance says curing should begin promptly after finishing and that edges and corners need protection from early traffic, so please keep tires off them at first. Before we leave, I'll tell you when your driveway is ready for your vehicle.
How thick should a concrete driveway be?
For passenger cars, a driveway usually starts at around 4 inches thick. Heavier loads, soft ground or a spot where the driveway meets another structure can call for a different design, and local and project requirements set the final thickness and mix. That's why it helps to mention a truck, a boat or an RV at the first visit.
Can I put pavers near the street in Boynton Beach?
Only if you take on the responsibility for them, because Boynton Beach treats pavers as not acceptable in its public right of way, the strip along the street that belongs to the city. The city does allow them under a hold harmless agreement, a legal document in which you accept full responsibility for maintaining and reinstalling them. You can read the city's rule on its engineering page.
What is the best way to pour a concrete driveway in Florida heat?
The best way is to plan around drying conditions, not just the temperature, because a windy, sunny day calls for stricter precautions than a calm, humid day at the same temperature. Hot-weather trouble with fresh concrete is most common in summer but can happen at any time of year, and a top that dries too fast can turn weak and dusty later. We usually pour early in the day and keep the surface from drying out, and you're welcome to ask me exactly how we'll handle your pour day.
Related services for your driveway project
Concrete patio construction
A back patio built on the same careful prep gives you a level, dry place to sit outside, and it can often be planned along with the driveway.
Stamped concrete services
If you'd like the front of your house to look more finished, a stamped pattern and color can give the driveway a stone or brick look.
Cities we serve for concrete driveways
Quality Boynton Beach Concrete Company is based in Boynton Beach, FL, and the 12 cities below each have their own page, including Boca Raton and West Palm Beach. We also work in many other cities around them, so if you don't see yours listed, please ask.
Plan your new concrete driveway with us
If you have your certified survey, any HOA approval and whether your road is a county road ready when you call, I can map out the permit steps at the first visit.